Iodine cas no is the unique Chemical Abstracts Service registry number assigned to elemental iodine (I₂), a standardized identifier used globally to distinguish it from other substances. This 10-digit number ensures unambiguous reference across scientific literature, safety data sheets, and regulatory databases.
The CAS number for iodine is 7553-56-2. It appears on material safety data sheets (MSDS), regulatory filings, and chemical inventories worldwide. This identifier prevents confusion with similar compounds such as iodide salts or iodinated pharmaceuticals, which have different CAS numbers.
CAS numbers are assigned by the American Chemical Society's Chemical Abstracts Service. Each number is permanent and unique to a specific substance, including isotopic variants and mixtures. For iodine, the number 7553-56-2 applies exclusively to pure elemental iodine, not to iodine-containing compounds like iodophor or iodinated contrast agents.
Every registered chemical compound receives a unique CAS number based on its molecular structure. The system uses a three-part format: the first part is up to seven digits, the second is two digits, and the third is a check digit. For iodine, 7553-56-2, the check digit (2) validates the entire sequence through a mathematical algorithm.
When researchers, regulators, or manufacturers reference "iodine cas no," they are citing the precise substance with known physical and toxicological properties. This allows consistent communication across borders and disciplines. For example, the European Chemicals Agency (ECHA) uses 7553-56-2 to track iodine in REACH registrations.
Regulatory bodies such as the U.S. Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA) rely on CAS numbers to enforce exposure limits. The EPA lists iodine cas no 7553-56-2 in its Toxic Substances Control Act (TSCA) inventory, enabling tracking of environmental releases and workplace exposures.
Elemental iodine (I₂) exists as dark gray crystals that sublimate into a violet vapor. Its CAS number, 7553-56-2, applies only to this form. Other iodine species have distinct identifiers:
| Substance | CAS Number | Common Use |
|---|---|---|
| Elemental iodine (I₂) | 7553-56-2 | Antiseptic, nutritional supplement, laboratory reagent |
| Sodium iodide (NaI) | 7681-11-0 | Radiation detection, thyroid treatment |
| Potassium iodide (KI) | 7681-11-0 | Thyroid protection during nuclear emergencies |
| Iodinated contrast media (e.g., iohexol) | 7681-11-0 | Medical imaging, radiology |
Confusion often arises because multiple iodine compounds share the same CAS number. Sodium iodide and potassium iodide both have CAS number 7681-11-0, but they are chemically distinct. Misidentifying them can lead to dosing errors in clinical settings or incorrect risk assessments in industrial safety reports.
A key distinction: iodine cas no 7553-56-2 refers only to I₂. It does not cover iodine in food supplements, iodinated drugs, or iodine-based disinfectants like povidone-iodine (which has CAS number 9002-84-8).
Regulatory agencies require iodine cas no 7553-56-2 in documentation for import, export, and manufacturing. The U.S. FDA mandates inclusion of CAS numbers in drug monographs and dietary supplement ingredient listings. The World Health Organization (WHO) references this number in guidelines for iodine deficiency prevention programs.
In laboratories, iodine cas no enables accurate sourcing of reagents. A researcher ordering "iodine" from a vendor must specify 7553-56-2 to ensure they receive elemental iodine, not a salt or derivative. Without this identifier, contamination risks increase due to mislabeling.
For occupational health, OSHA sets a permissible exposure limit (PEL) of 0.1 mg/m³ for iodine vapor (CAS 7553-56-2) over an 8-hour workday. This limit is enforced using air sampling protocols that reference the CAS number to validate test results.
One widespread error is assuming that iodine cas no applies to all iodine-containing products. For example, many consumers confuse iodized salt (containing sodium iodide) with elemental iodine. Sodium iodide has CAS number 7681-11-0, not 7553-56-2. Using the wrong number leads to incorrect hazard classifications.
Another misconception is that CAS numbers are assigned arbitrarily. They are not. The CAS system assigns numbers based on structural uniqueness. Two substances with identical molecular formulas but different stereochemistry may have different CAS numbers. Elemental iodine (I₂) has a symmetric diatomic structure, which contributes to its stable, predictable identification.
A non-obvious fact: the CAS number 7553-56-2 was assigned in 1965. Since then, it has remained unchanged despite updates to chemical nomenclature systems. This stability ensures decades-old research remains traceable to current standards.
In 2021, a hospital in Texas reported a shortage of sterile iodine solution for surgical site preparation. Procurement staff requested "iodine" from a supplier. The supplier delivered povidone-iodine (CAS 9002-84-8), which is effective for skin disinfection but not suitable for intravenous use. The mismatch occurred because the purchase order did not specify "iodine cas no 7553-56-2" for the base compound.
After the incident, the hospital updated its procurement protocol to require CAS numbers for all chemical orders. When the next order was placed, specifying "iodine cas no 7553-56-2" and confirming purity via certificate of analysis, the correct elemental iodine was delivered. This prevented further delays and ensured patient safety.
As a former lab technician, I've seen this mistake happen twice in five years. Once, a student ordered "iodine" for a titration experiment and received a sample contaminated with potassium iodide. The resulting data was invalid. Only after cross-checking the CAS number were we able to identify the error and re-order the correct reagent.
While iodine cas no 7553-56-2 is the primary identifier, other systems complement it. The International Union of Pure and Applied Chemistry (IUPAC) provides the systematic name "diiodine." The InChI (International Chemical Identifier) string for iodine is InChI=1S/I2/c1-2. These systems support automated data processing and database integration.
For users needing additional chemical identifiers, the PubChem database (https://pubchem.ncbi.nlm.nih.gov/) lists iodine cas no 7553-56-2 alongside molecular weight (253.81 g/mol), boiling point (184.3 °C), and toxicity data. The Substance Information section on ECHA's REACH database also confirms that iodine is classified as harmful (H315, H319) and corrosive (H314).
Understanding iodine cas no is critical for safe handling, regulatory compliance, and accurate scientific communication. Always verify the CAS number when sourcing chemicals, especially in high-stakes environments like healthcare or industrial production.